Dovetail Key | Blender Add-on

Product Link: https://www.artstation.com/a/55281257

Dovetail Key — Blender Add-on

Cut any mesh and rejoin the pieces with strong, self-aligning dovetail joints — built for splitting models that are too large to 3D print in one piece. Draw a line across the exact part you want to cut, and Dovetail Key turns the two halves into an interlocking male/female joint that snaps together like puzzle pieces. It runs right in the viewport and handles dense, high-poly sculpts without crashing.

WHAT IT DOES

🔪 Draw-to-cut — Drag a straight line across only the part you want to split. Only the geometry under your stroke is cut; the rest of the model stays untouched.

🧩 One-click dovetail joint — Select both halves and get an automatic tapered peg (male) + matching socket (female) with print-ready clearance. Cutters are applied and cleaned up for you.

🎛️ Auto or Manual — Sizes itself to the cut cross-section automatically, or switch to Manual to set Scale, Height, and Flip by hand — with a live preview before you commit.

🔁 Flip — Reverses the taper and auto-swaps the male/female sides so the joint always stays correct.

🧱 Built for heavy sculpts — bmesh-based cutting (not a heavy boolean), so it stays stable on multi-million-poly meshes. Solver options: Fast / Manifold / Exact.

✨ Clean results — Smooth shading with sharp edges preserved on both pieces.

↩️ Non-destructive — Undo Last Cut and Delete All Cuts revert your model from a safe, backup-based history.

PERFECT FOR
Resin/FDM prints too big for the plate · action figures & busts · cosplay props · modular kit-bashing · keyed assemblies.

REQUIREMENTS

Blender 4.2+ (extension with manifest). Legacy single-file version for Blender 3.0+.
Works in Object Mode.
WHAT YOU GET

dovetail_key-1.13.2.zip (Blender 4.2+ extension)
Legacy Dovetail_Key.py add-on (Blender 3.0+)
SUPPORT & COMMUNITY
Discord: https://discord.gg/EC8d7nPsYj

By Milad Kambari — 3DRedbox Studio